water proofTYPE-Cgrading of
Waterproof TYPE-CCompared with other USB interface sockets, it has the advantages of waterproof, small size and easy access, which is very in line with the development trend of miniaturization and refinement of electronic equipment. Especially for some modern electronic products, the waterproof performance of the product will become attractive. Consumer eyeballs increase customer interest and purchase. For example, waterproof phone watches, waterproof headphones, waterproof wristbands, waterproof mobile phones, etc. In short, these products will use waterproof type-c sockets, specific product requirements Different, the required waterproof level will also be different, how to divide it specifically, the following is a detailed analysis for you:
Waterproof TYPE-CThe international general waterproof level is 9, and each level has a professional explanation.
Level 0 is commonly known as no protection, without any protection measures.
Level 1 is commonly known as anti-vertical dripping, and dripping in the vertical direction will not affect the device.
The 02 grade is commonly known as anti-slant drop, and the two sides are inclined at 15 degrees, which will not affect the equipment.
Level 03 is commonly known as waterproof shower, and the water splashed within 60 degrees will not affect the equipment.
04 grade is commonly known as waterproof splash, splashing water at any angle will not affect the device.
05 grade is commonly known as waterproof spray, spraying water from any direction will not affect the equipment.
06 grade is commonly known as anti-strong spray, use strong water pipe to spray arbitrarily, it will not affect the equipment.
Level 07 is commonly known as immersion in water, and immersion in 1 meter deep water for 30 minutes has no effect on the equipment.
08 level is commonly known as diving, fully submerged in 1.5 meters deep water for half an hour and has no effect on the equipment.
Grade 09 is commonly known as anti-high temperature and high pressure spray, high temperature below 80 degrees, 10kpa high pressure water spray from 4 directions has no effect on the equipment.
Waterproof TYPE-CAfter the production is completed, they all need to be tested for performances such as water resistance, temperature resistance, humidity resistance, salt spray resistance, vibration and shock, and electrical properties.And mechanical performance test, after fully qualified, can meet the shipping requirements.